This Inverter Support 2x60A MPPT Solar Charger Controller
The maximum solar charging current :2x60A=120A
The maximum charging current : 200A (2x60A MPPT+80A AC Charger =200A)
Rated charge current:60A
Rated Battery voltage:48VDC
Input voltage range:50-145Vdc
Max. PV open circuit array voltage:150Vdc
Max. recommended input power (W) :3500W
Inverter Output Specifications
Continuous Output Power: 12000 Watts
Surge Rating: 36000 Watts
Output Wave Form: Pure Sine Wave
Output Voltage: 120/240Vac
Nominal Efficiency: 90% (Peak)
Line Mode Efficiency: >99%
Output Frequency: 50Hz / 60Hz ± 0.3Hz
Typical Transfer Time: 10ms
Inverter Input Specifications
Nominal DC Input Voltage: 48.0Vdc
Low Battery Alarm: 42.0Vdc-44.0Vdc
Low battery Trip: 40.0Vdc-42.0Vdc
High Voltage Shut-down: 64.0Vdc
Low battery Shut-down Recovery:44.0 ± 0.8Vdc
High battery Shut-down Recovery:62.0 ± 0.8Vdc
Idle Consumption: 230 Watts
Nominal Input Frequency:50Hz / 60Hz (Auto detection)
Nominal Charge Current:
12VDC model: Max 90A
24VDC model: Max 70A
48VDC model: Max 50A
Over Charge Protection:
Bat. V ≥15.5Vdc, Fault, Buzzer alarm for 12Vdc
Bat. V ≥31.0Vdc, Fault, Buzzer alarm for 24Vdc
Bat. V ≥61.0Vdc, Fault, Buzzer alarm for 48Vdc